Table of Contents
Advertisement
Page 124 of 532
Figure 32
Positioning the top cover and the BLF/CGM
Rotate Back
553-3001-367
Standard 1.00
BLF/CGM
Procedure 18
Removing the Busy Lamp Field/Console Graphics Module
1
Disconnect the main power/system cable from the rear of the attendant
console, and remove the handset jack plug from the side.
2
Move the adjustable display to the down position to protect it from
damage while removing the BLF/CGM. Also move the volume slider
switch to the far left (see Figure 26 on
3
Place the attendant console facedown on a properly prepared work
surface, taking care to avoid scratching or damaging the top cover or
display. Remove the adjustable stand, if required.
The stand is secured with four screws. Remove the stand as a
complete assembly, and set it aside.
October 2003
Slide Back
and Down
page
118).
Top Cover
Base
553-AAA0632
Advertisement
Table of Contents
