Table of Contents
Advertisement
Page 376 of 532
553-3001-367
Standard 1.00
functionality, you require an M3904 Phase III set equipped with an FDHF
cartridge.
The FDHF functionality requires the following hardware:
•
M3904 Phase III set (NTMN34GA)
Note: NTMN34TA is the M3904 Phase III Icon set.
•
Full Duplex Handsfree cartridge (NTMN72AA)
•
Accessory Connection Module (ACM) (NTMN71AA)
•
One of the following wall transformers to power the FDHF cartridge:
— 110V wall transfer (NTMN80AA)
— 220V wall transformer (NTMN80BA)
— EU 230V wall transformer (NTHC09AA)
— UK 230V wall transformer (NTHC08AA)
Brandline insert
The M3901 Series Meridian Digital Telephone contains a removable insert
made to accommodate your company logo.You can order blank Brandline
Inserts with your company logo. The M3903, M3904 and M3905 supports
electronic brandline.
Meridian Communications Adapter (MCA)
The Meridian Communications Adapter lets the user connect the telephone to
a personal computer or terminal. This allows the telephone to exchange data
between your computer and other computers. The M3902, M3903, M3904,
and M3905 models support the MCA.
Accessory Keying
A maximum of two cartridge accessories can plug into the slots at the rear of
the terminal stand. The ports provide access to a SIDL/SDI ports, USART
port, and GPIO0. Two accessories cannot access the same serial port. The
mechanical keying prevents this situation from occurring. Refer to
Figure 101 for a better understanding of mechanical keying.
October 2003
Advertisement
Table of Contents
