Page 68 of 532
Figure 14
Installing the M2616CT battery
Optional headset attaches
to handset for
handsfree activity
WARNING: Do NOT plug stereo/audio
headset into the M2616CT jack. This
could cause damage to the headset.
Main battery
1. Clip Main battery into back of handset.
2. Place bottom of battery in position.
3. Snap top of battery into place
553-3001-367
Standard 1.00
Result: The yellow indicator lights when the battery is properly connected.
The battery begins to charge as soon as the handset is placed in its
cradle. The main handset battery 700 mAh fully recharges in
approximately 2.25 hours, the 1000 mAh battery charges in 3 hours.
Note: The spare battery charging port on the base unit provides a "trickle
charge" that charges the battery at a slower rate than through the
handset.
October 2003
End of Procedure
Spare battery (optional) slides into base
Contact points MUST meet
Handset rests in cradle above battery
Spare
battery
Contact
points
Spare battery indicator light
is yellow when battery
is charging in spare port
Main battery indicator
is red when battery is
charging and green
when battery is charged
553-AAA0589