Page 398 of 532
Changing telephone positions
Wall mounting the telephone
553-3001-367
Standard 1.00
Your M3903, M3904 and M3905 Meridian Digital Telephones have several
different height selections for the desktop positions.
To change the telephone position:
1
Press the tilt handle located at the top back side of the telephone.
2
With the tilt handle pressed in, raise or lower the telephone to the desired
angle or height.
3
Release the tilt handle to lock the telephone in the desired position.
Note: The M3903 and M3904 can be wall mounted using the optional
wall mount bracket.
The M3901 and M3902 Meridian Digital Telephones have three different
angled height desktop positions.
To change the telephone angle:
1
Move the top of the footstand away from the telephone base (it has a snap
connection).
2
Place the footstand in the desired position and snap the top of the
footstand back into place.
The telephone wall mount bracket kit contains a one piece wall mount plate
to attach the telephone to the wall.
To wall mount the telephone:
1
Place the wall mount bracket against the wall and mark the spot to insert
the screws.
Note: M3901 and M3902 have built-in wall mount brackets.
2
Screw the five screws in and leave about 3 1/2 mm (1/8 inch) between the
head of the screw and the wall.
3
Remove the footstand from the telephone by sliding the footstand down
(using the plastic hinges) about 7 mm (1/4 inch).
October 2003