Table of Contents
Advertisement
LD 11 – Allow/Deny Handsfree for M2008HF
Prompt
REQ:
TYPE:
CLS
Features keys
factory with a hardware jumper enabled to enable the Handsfree option for
existing software releases.
System software overrides the hardware setting and default to Handsfree
Denied (HFD.) If the handsfree option is desired, the system administrator
simply enables Handsfree through the Class of Service prompt HFA included
in LD 11 for the M2008 telephones (consistent with M2616).
Service Change Parameters
Response
NEW CHG
M2008
(HFD)
HFA
Handsfree operates as if an off-hook operation had been performed. For
example, when the telephone is idle, pressing the Handsfree/Mute key turns
on the Handsfree and selects a DN (depending on line selection as assigned
through COS), enabling the user to make a call. When a call comes in to an
M2008HF/M2616 and the set is ringing, pressing the Handsfree/Mute key
turns on the Handsfree and enables the user to answer the incoming call
(depending on COS-assigned line selection) without picking up the handset.
Each M2000 Series Meridian Digital Telephone has a number of
programmable keys with LCD indicators that can be assigned to any
combination of directory numbers and features (only one DN for the M2006).
The lower right-hand key (key 0) is reserved for the Primary DN.
M2000 description
Description
M2008 Digital Telephone
Digital Telephone Handsfree Denied
Digital Telephone Handsfree Allowed
Telephones and Consoles
Page 93 of 532
Description
Advertisement
Table of Contents
