Nortel Meridian 1 Succession 1000 Description page 245

Attendant PC configuration
Figure 69
Attendant PC Unit
brandline
insert
Status LED
M1250 and M2250 Attendant Consoles
QMT2 feature enabled
When the QMT2 feature is enabled, the following conditions apply:
• If the console is not in Shift mode, the keys in strip AK and/or BK
function as Incoming Call Identification (ICI) keys.
• If the console is in Shift mode, the keys in keystrips AK and BK function
as Trunk Group Busy (TGB) keys. That is, they imitate the keystrips of
the QMT2 add-on module as follows:
— The LCD indicators pointing to the left indicate busy trunks.
— The LCD indicators pointing to the right indicate incoming calls.
The Attendant PC Software application operates with the Attendant PC Unit.
See Figure 69 on page
the attendant's PC monitor, and provides connection to the MDF and PC
communications port. The Attendant PC Unit hardware allows the software
to communicate with the system and simulate M2250 operation through a
Windows 95® operating system environment. The Attendant PC Unit is
configured in LD 12. Refer to Software Input/Output: Administration
(553-3001-311) for configuration information.
alerter speaker
245. The Attendant PC Unit is typically installed under
Telephones and Consoles
Page 245 of 532
headset/handset
volume control
553-AAA0576
Description