NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
2. Lower the air shroud into the system until it is firmly seated.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
Figure 19. Installing air shroud
Next steps
1.
Install the system
cover.
2. Follow the procedure listed in
Cooling fans
Removing the cooling fan
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove air
shroud.
Steps
1. Press the release tabs on the fan cable connector and disconnect the cable from the system board.
2. Lift the cooling fan from the cooling fan cage.
After working inside your
Safety
instructions.
Before working on your
system.
system.
Installing and removing system components
55