Table of Contents
Advertisement
Figure 2. Front view of 4 x 3.5-inch drive system
Table 2. Features available on the front of the system
Item
Ports, panels, and slots
1
Left control panel with
iDRAC reset button
2
Optical drive
3
Drive
4
Right control panel
5
Information tag
For more information about the ports, see the Dell EMC PowerEdge R350 Technical Specifications on the product
documentation page.
For more information about the ports, see the
Rear view of the system
Figure 3. Rear view of the system
Table 3. Rear view of the system
Item
Ports, panels, or slots
1
Serial connector
2
Ethernet ports
3
PCIe expansion card slot 1
4
PCIe expansion card slot
2
5
BOSS riser slots
Icon
Description
Contains the system health, and system ID indicator.
NOTE:
To reset the iDRAC without changing any saved settings
press and hold the System Identification button for at least 16
seconds.
N/A
Enables you to install optical drive that is supported on your system.
N/A
Enables you to install drives that are supported on your system.
N/A
Contains the power button, USB port, iDRAC Direct micro port, and the
iDRAC Direct status LED.
N/A
The Information tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If you
have opted for the secure default access to iDRAC, the Information tag
will also contain the iDRAC secure default password.
www.dell.com/poweredgemanuals
Icon
Description
Enables you to connect serial devices.
The Ethernet ports that are integrated on the system board
provide network connectivity. These NIC ports can also be shared
with iDRAC when iDRAC network settings is set to shared mode.
Enables you to connect PCI Express expansion cards.
Enables you to connect PCI Express expansion cards.
Enables you to connect BOSS card.
section.
PowerEdge R350 system overview
9
Advertisement
Table of Contents
