Chapter 5. Maintenance; Restart Device - ZyXEL Communications XGS3600 Series Manual

Chapter 5.
This chapter describes all of switches Maintenance configuration tasks to enhance
the performance of local network including Restart Device, Firmware upgrade,
Save/Restore, Import/Export, and Diagnostics.

5-1 Restart Device

This section describes how to restart switch for any maintenance needs. Any configuration
files or scripts that you saved in the switch should still be available afterwards.
Web Interface
To configure a Restart Device Configuration in the web interface:
1. Chick Restart Device.
2. Click Yes.
Figure 5-1.1: The Restart Device
Parameter description:
Restart Device :

You can restart the stack switch on this page. After restart, the stack switch will boot
normally.
Buttons:

Yes – Click to "Yes" then the device will restart.
No- Click to undo any restart action.
Maintenance
XGS3600 Series User's Guide
312