Maintenance; Chapter 41 Maintenance; The Maintenance Screen - ZyXEL Communications MES3500-24S User Manual

This chapter explains how to configure the screens that let you maintain the firmware and configuration
files.

41.1 The Maintenance Screen

Use this screen to manage firmware and your configuration files. Click Management > Maintenance in
the navigation panel to open the following screen.
Figure 219 Management > Maintenance
The following table describes the labels in this screen.
Table 168 Management > Maintenance
LABEL
Current
Firmware
Upgrade
Restore
Configuration
Backup
Configuration
Load Factory
Default
Save
Configuration
Reboot System
Tech-Support
DESCRIPTION
This field displays which configuration (Configuration 1 or Configuration 2) is currently operating
on the Switch.
Click Click Here to go to the Firmware Upgrade screen.
Click Click Here to go to the Restore Configuration screen.
Click Click Here to go to the Backup Configuration screen.
Click Click Here to reset the configuration to the factory default settings.
Click Config 1 to save the current configuration settings to Configuration 1 on the Switch.
Click Config 2 to save the current configuration settings to Configuration 2 on the Switch.
Click Click Here to go to the Reboot System screen.
Click Click Here to see the Tech-Support screen. You can set CPU and memory thresholds for log
reports and download related log reports for issue analysis. Log reports include CPU history and
utilization, crash and memory.
MES3500-24S/MGS3520 Series User's Guide
C
H A P T E R

Maintenance

338
41