Link Aggregation Setting - ZyXEL Communications GS1920v2 Series User Manual

30.3 Link Aggregation Setting

Click PORT > Link Aggregation > Link Aggregation Setting to display the screen shown next. See
30.1 on page 161
Figure 111 PORT > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Table 75 PORT > Link Aggregation > Link Aggregation Setting
LABEL
This is the only screen you need to configure to enable static link aggregation.
Group ID
Active
Chapter 30 Link Aggregation
for more information on link aggregation.
DESCRIPTION
The field identifies the link aggregation group, that is, one logical link containing multiple ports.
Select this to activate a trunk group.
GS1920v2 Series User's Guide
164
Section