Understanding The Remote Address Window - Bay Networks Manager User Manual

Chapter 11 Assigning Remote Addresses
Annex Manager User Guide
11-2

Understanding the Remote Address Window

The window uses the
Remote Address
fields to enter and display information. The
displays the last remote address; you cannot enter text here.
•
First Remote Address
range of ports or channels for the selected Annex. If this field
displays
0.0.0.0,
are 0.0.0.0
.
If any of the values set for individual ports or channels using
other methods (
consecutive, this field and the
blank.
If you change the
address you entered is assigned to the first port or channel of
the Annex you selected in the main window. Subsequent ports
or channels are then assigned IP addresses numbered
consecutively after the first address (if you enter 0.0.0.0, all IP
addresses in the range are assigned this value). For 5399
devices, IP addresses are assigned consecutively beginning
with the first channel of the first WAN Module and ending with
the last channel of the second WAN Module.
For information about
Asynchronous Port Values and Chapter 9, Setting Call Default Values.
First Remote Address
Last Remote Address
assigns the first IP address of the entire
all addresses in the range of ports or channels
, , or Customized mode) are non-
admin na
Last Remote Address
First Remote Address
Address Assignment
Part 2 Setup Mode
and
Subnet Mask
field
field are
and click , the IP
Apply
, see Chapter 7, Setting