Copying Parameter Values - Bay Networks Manager User Manual

Chapter 18 Comparing and Copying Parameters and Values
Using the Copy
Command
Annex Manager User Guide
18-16
Using Push Buttons
provides the following push buttons:
Copy
• activates the
Apply
and scripts you selected. When you click
window appears, allowing you to verify the
Confirmation
command. The
selected
Confirm Auto Reset
parameter values you are copying require an Annex to be reset.
• displays the standard
Save Msgs
includes the default text directory. You can enter a file name in
the field and click
Selection
contents or click
• displays a window that explains the
Help
• removes the
Close

Copying Parameter Values

You can use the command to copy parameter values from one Annex
Copy
or port to one or more other Annexes or ports. To use this command:
1. Create an Annex List in the main window.
works only for reachable Annexes. For more information
Copy
about Annex lists, see Chapter 4, Using the Main Window.
2. Move the pointer to the Configure menu and select
The window displays (see
Copy
command based on the Annexes
Copy
window follows if you
Reset Parameters
from the pull-down menu and if the
File Selection
OK
to return to the
Cancel
window from your display.
Copy
Figure 18-5 on page
Part 3 Customize Mode
, the
Apply
Copy
window, which
to store the Output box
window.
Copy
command.
Copy
.
Copy
18-12).