Chapter 20
Displaying Status Information
Displaying T1 Internal CSU Status Information
Displaying the
Window
Annex Manager User Guide
20-28
5.
Enter the interval numbers you need in the
You can enter one or more numbers, a range of numbers separated
by commas or dashes, or
6.
Press
Apply
T1 engine status information appears in the
and
CSU Status,
The
Annex T1 Internal CSU
T1 network interface. This section includes:
•
Displaying the Annex T1 Internal CSU Status Window
•
Understanding the Annex T1 Internal CSU Status Window
•
Viewing T1 Internal CSU Status Information
Displaying the Annex T1 Internal CSU Status
Window
The
command originates in the
T1 Internal CSU
window:
1.
Create an Annex list in the main window.
For more information about creating Annex lists, see Chapter 4,
Using the Main Window.
2.
Select a single Annex that contains a T1 DS1 interface from the
list.
3.
Hold the mouse button on the Status menu, select
Part 4
Control and Status Commands
.
all
.
boxes.
Interval Information
command provides information about the Annex
field.
Interval(s)
,
PRI CSU Alarms
PRI
menu. To display the
Status
T1.