Part 2
Setup Mode
Chapter 14
Using Push Buttons
The
window uses the
IP
buttons. For more information about these buttons, see Chapter 5, Setup
Mode Basics.
Changing IP Window Settings
You can enter new values for the
for its RIP fields:
1.
Display the
IP
2.
Enter new values or change existing ones.
3.
Click
Apply
The
Reset Parameters
the
Confirm Auto Reset
settings you changed require Annex Manager to reset Annexes. If
you did not select
Annexes without notifying you.
Figure 14-3. Reset Parameters Window
Using the AppleTalk, IP, IPX, and LAT Windows
,
,
Apply
Restore
window address and change selections
IP
window.
.
window
(Figure
14-3) appears if you selected
option from the pull-down menu and if the
, Annex Manager resets
Confirm Auto Reset
Annex Manager User Guide
push
, and
Help
Close
14-5