Figure 2-4. Check Buttons - Bay Networks Manager User Manual

Chapter 2 Window Basics
Selecting Check
Buttons
Annex Manager User Guide
2-18
Using Check Buttons
Check buttons are marked with a small square ( ) that precedes a label.
They allow you to turn a selection on or off. You can select one or more
check buttons.
To use check buttons:
1. Move the pointer to the square shape ( ).
2. Click the mouse button.
When you turn a selection on, the center of the square is
highlighted. When you turn a selection off, the center of the square
is empty.
3. Move the pointer to the next check button you want to select
and repeat steps 1 and 2.
When you select more than one button, the previously selected
buttons remain highlighted.
Figure 2-4 shows the check buttons in the
button is turned on.
Window Parameters

Figure 2-4. Check Buttons

Part 1 Annex Manager Basics
command. The
Create Script Main