Chapter 3
Working with Annex Manager Windows
Annex Manager User Guide
3-12
Using the Reset Parameters Window
Annex Manager displays the
parameters that require resetting an Annex (see
window requires that you verify a reset procedure for the
Parameters
, and
Copy
Execute Script
W
ARNING
Figure 3-5. Reset Parameters Window
Selecting the Confirm Auto Reset Option
The
Confirm Auto Reset
displays the
Reset Parameters
check button. The check button is selected when you begin using Annex
Manager. This requires that you respond to the
is located in the
Confirm Auto Reset
window. You can deactivate the
check button to clear the box. If you do not choose this option Annex
Manager resets the Annexes you selected automatically.
If you change values for port parameters only, Annex Manager
resets the ports you selected. It does not reset the entire Annex.
Reset Parameters
commands.
entry determines whether or not Annex Manager
window. It is the only menu entry that is a
pull-down menu of the main
Options
Reset Parameters
Part 1
Annex Manager Basics
window if you changed
Figure
3-5). The
Reset
window.
Reset Parameters
window by clicking the
,
Set