Understanding The Boot Window Format - Bay Networks Manager User Manual

Part 4 Control and Status Commands
In this example, the
Pref Load Addr
display values automatically. If you select multiple Annexes whose values
differ, these fields do not contain values. For example, if you select two
Annexes with the same
a warning window appears and the
Addr,
display a value.

Understanding the Boot Window Format

The window radio buttons define the type of
Boot
fields control the
Boot
message to users. The Annex Manager standard push buttons activate the
command. This section describes each window element.
Defining Boot Options
You can choose one of the following
• boots selected Annexes as soon as you activate the
Immediate
command.
• accepts a
Delayed
enter more than one delayed request. However, if you enter a
second request for a time earlier than an existing request, the
selected Annexes boot at the earlier time and all other existing
boot requests are deleted.
• saves the current image to the address you enter in the
Dump
Pref Dump Addr
• places an Annex in test mode and begins diagnostic
Diagnostic
tests. When these tests end, the Annex is in ROM Monitor
mode and cannot respond to Annex Manager requests until you
boot it.
Chapter 19
,
Pref Dump Addr
and different values for
Pref Load Addr
Pref Dump Addr
command addresses, source, time, image, and
Boot Option
at which the boot occurs. You can
Boot Time
field.
Annex Manager User Guide
Booting and Resetting Annexes
, and fields
Boot Image
Pref Dump
field does not
operation. Text
boot
buttons:
19-3