Changing Parameter Values - Bay Networks Manager User Manual

Chapter 16 Viewing and Changing Parameters
Annex Manager User Guide
16-12
• displays parameter values in the work area and lists
Show Values
parameters in the message box. When you use this button to
verify current values, it erases new values you entered but does
not deselect marked parameters.
An asterisk appears in the button if you use
change the Annex list or port/channel information in the main
window, or if you change the port or channel numbers in this
window. The asterisk indicates that the message box values
may not be current. It disappears when you click
again.
• deletes current information from the message box
Clear Display
and deselects marked parameters. It does not change values
displayed in the work area.
• displays the standard
Save Msgs
enter a file name in the
store the contents of the
to return to the
Cancel
• displays a window explaining the
Help
• removes the
Close
You can leave the window displayed and use
parameter option that differs from your original selection. In this case,
you must choose
these new parameters.

Changing Parameter Values

allows you to change parameter values. You can select new Annexes,
Set
ports or channels, parameter groups, individual parameters, or check
original values during this process.
File Selection
field and click
Selection
window output box, or click
Set
window.
Set
window from your display.
Set
Set
again in the main window to display
Set
Part 3 Customize Mode
and then
Show Values
Show Values
window. You can
to
OK
command.
Set
again to select a