Figure 4-6. Annex List - Bay Networks Manager User Manual

Part 1 Annex Manager Basics
Creating a List
Creating an Annex List
When you create an Annex list, Annex Manager verifies the name you
enter and displays it, with its hardware type, in the
create an Annex list:
1. Enter a name or an IP address in the
You can enter an Annex name or its IP address. If you add an Annex
to this list using one identifier (e.g., a name) and repeat the process
using the other identifier (e.g., the IP address) for the same Annex,
a message informs you that the Annex is already included in the list.
If you enter a device with which Annex Manager cannot
communicate via SNMP,
Annex type. If you enter a device name that responds to SNMP but
is not an Annex, or if you enter the name of an unknown device, a
warning message informs you that the device cannot be added to
the list. For more information about the
designation, see Chapter 23, Troubleshooting.

Figure 4-6. Annex List

2. Enter the Annex SNMP community string in the
The default string for the Annex is
automatically if you do not complete this field.
Chapter 4
Annex
displays in place of the
NOT REACHABLE
NOT REACHABLE
. This string appears
public
Annex Manager User Guide
Using the Main Window
box. To
Annex List
field (Figure 4-6).
Community field.
4-7