Understanding The Snmp Information Window Format - Bay Networks Manager User Manual

Chapter 4 Using the Main Window
Annex Manager User Guide
4-20
Understanding the SNMP Information Window
Format
The window uses text fields, check buttons, and push
SNMP Information
buttons. You can update information that appears in the text fields for one
or more Annexes or you can change the Annex Manager default values.
Annex Manager saves the values you change using
for an active session only. When you exit Annex
Information
Manager, the original
are reinstated.
Using Text Fields
uses the following text fields:
SNMP Information
• specifies the length of time in seconds that Annex
Timeout
Manager waits for a response. You can enter a number of
seconds here. If you leave this field blank,
uses the Annex Manager five second default.
• controls the number of times that Annex Manager tries
Retries
to reach an Annex or other device on the network. You can
enter a number here. If you leave this field blank, the command
uses the Annex Manager default of 0 (zero) retries.
•
Community String
uses to communicate with Annexes. You can enter a new string
here. If you do not complete this field, Annex Manager uses
, which is the default community string.
public
The initial display of the
include values for these fields. To display current Annex values or
the Annex Manager default values, you must use
.
Show Annex
Part 1
, and
Timeout, Retries
specifies the SNMP password Annex Manager
SNMP Information
Annex Manager Basics
SNMP
values
Community String
SNMP Information
command does not
Show Default or