Bay Networks Manager User Manual page 413

Part 5 Reference Information
hardware_tabs
host_table_size
image_name
imask_7bits
allows the Annex to convert ASCII tab characters to the correct number of spaces
when a terminal does not support hardware tabs. This parameter works only for
CLI sessions.
Type
Async
Values
enabled or disabled
Default
enabled
Lists Async Port, Command Line Editing
defines the number of entries allowed in the host table. Entering
unlimited number of entries. Entering
In this case, the Annex requires a name server to resolve every host name.
Type Annex
Values 0 to 255
Default 64
Lists Annex Only, Modem
provides the file name for the operational code that loads by default when you
boot an Annex. You can enter a name using up to 100 characters.
Type Annex
Values 1 to 100 characters
Default " " (null string)
Lists Annex only
allows an Annex to mask input to seven bits. If you choose
expects eight-bit ASCII input.
Type Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, Basic Async Port
Chapter 22
indicates that there is no host table.
254
Annex Manager User Guide
Annex Parameters
allows an
255
, the Annex
disabled
22-49