Figure 2-3. Radio Buttons - Bay Networks Manager User Manual

Part 1 Annex Manager Basics
Selecting Radio
Buttons
Using Radio Buttons
Radio buttons allow you to turn a selection on or off. These buttons are
marked with a diamond shape ( ) that the window manager fills in when
you select a button. Radio buttons always appear in a box in sets of two
or more. You can select only one button in each set.
To use a radio button:
1. Move the pointer to the diamond shape
2. Click the mouse button.
When you select a radio button, the center of the diamond is
highlighted. If you select another button in the set, the highlighting
of the first button disappears.
Figure 2-3 shows the radio buttons in the

Figure 2-3. Radio Buttons

Chapter 2
( )
command.
Boot
Annex Manager User Guide
Window Basics
.
2-17