Chapter 19
Booting and Resetting Annexes
Displaying the
Window
Annex Manager User Guide
19-10
Displaying the Reset Window
The
command originates in the Configure menu. To display this
Reset
window:
1.
Create an Annex list in the main window.
For more information about Annex lists, see Chapter 4, Using the
Main Window.
2.
Select one or more Annexes from the list.
3.
Hold the mouse button on the Configure menu, choose
and release the mouse button.
The
window appears,
Reset
Figure 19-3. Reset Window
Part 4
Control and Status Commands
Figure
19-3.
Reset