Understanding The Modem Database; Figure 12-5. Reset Parameters Window - Bay Networks Manager User Manual

Chapter 12 Editing Modem Definitions

Understanding the Modem Database

Annex Manager User Guide
12-8
5. Click
Apply
The
Reset Parameters
selected the
Confirm Auto Reset
and if the settings you changed require Annex Manager to reset
Annexes. If you did not select
resets Annexes without notifying you.

Figure 12-5. Reset Parameters Window

The Annex Manager modem database consists of modem definitions
stored in the Annex configuration file and in
Setup mode gives you access to:
• The section of the Annex configuration file. The
Modems
Annexes you select must use the same configuration file on the
same host and must use the same address for current and
default boot hosts. The configuration file does not have to
reside on the same host as does Annex Manager.
• Any files referenced in the accessible Annex
include
configuration files. These
Manager default modem definitions.
References to
definitions in the configuration file.
.
(Figure 12-5) window appears. if you
option from the pull-down menu
Confirm Auto Reset
include
files contain the Annex
include
files must follow modem
include
Part 2 Setup Mode
, Annex Manager
files. Annex Manager