Mp_Endpoint Class And Address Example - Bay Networks Remote Annex Administrator's Manual

Multilink PPP Addendum to the Remote Annex Administrator's Guide for UNIX
mp_endpoint_
class
mp_endpoint_
address
PSNDN - Public
Switched Network
Directory Number
10 166-024-833 Rev. A
Sets the value of the local Endpoint Discriminator Class to one of the
following allowed classes. (The remote endpoint is allowed to use all
classes specified in RFC 1990.)
Default = MAC (class 3)
Accepted values:
NULL, IP, MAC, PSNDN, DEFAULT (alias for MAC)
Selecting... Causes the RA 6300...
NULL to use the NULL Endpoint Discriminator.
IP to use the ethernet interface IP address of the RA 6300
for the Endpoint Discriminator Address.
MAC to use the MAC address of the ethernet interface of the
RA 6300 for the Endpoint Discriminator Address.
PSNDN to use the value stored in the mp_endpoint_address
parameter for the Endpoint Discriminator Address.
DEFAULT to use the default Endpoint Discriminator Class (MAC).
Sets the value of the Endpoint Discriminator Address for Endpoint
Discriminator Classes that allow user-configured information. This
parameter is only accessed when set to PSNDN (Public Switched
Network Directory Number).
Default = not set or empty string
Minimum length = 0 characters
Maximum length = 15 characters

mp_endpoint Class and Address Example

A telephone number, up to 15 numeric characters long.
Example: 16172728140