Understanding Setup Windows - Bay Networks Manager User Manual

Part 2 Setup Mode

Understanding Setup Windows

Setup mode uses the following types of windows:
• The main window provides access to Setup mode windows.
Although it always appears, you cannot return to it unless you
first close all Setup mode windows.
• Setup mode lets you change frequently used settings in
,
Async Ports Call Defaults
, ,
AppleTalk IP IPX
by selecting an option from the
window. When you complete the fields and click
your changes take effect. You can then choose another
field option or click
• A
Confirmation
rather than
Close
your changes do not take effect if you continue the closing
process.
• A
Reset Parameters
needs to reset Annexes or ports for your changes to take effect.
This window appears only when you select
from the pull-down menu of the main window.
• windows appear when you click
Help
do for all Annex Manager modes and commands. In addition,
the Setup mode provides a single line at the bottom of each
window that gives you a brief summary for each field. A short
message appears automatically as you move the mouse pointer.
The ,
Reset Parameters Warning
Manager windows. For more information about these windows, refer to
Chapter 3, Working with Annex Manager Windows.
,
Remote Address
, and windows. You can display a window
LAT
Setup
to return to the main window.
Close
window appears if you change settings and click
. This window informs you that
Apply
window informs you that Annex Manager
, and windows are the same for all Annex
Help
Annex Manager User Guide
Chapter 5 Setup Mode Basics
General
, ,
WAN Modules Security
field that appears in each
,
Apply
Setup
Confirm Auto Reset
or , as they
Help F1
,
,
5-3