Setup Mode Basics - Bay Networks Manager User Manual

T
he Annex Manager Setup mode appears in the main window when
you first use Annex Manager software. This mode allows you to configure
one or more Annexes by setting the most commonly used parameters.
The Setup mode limits your access to Annex Manager commands.
If you use this mode, you can use the
List, Boot, Broadcast, Discover Annexes, Edit Configuration, WAN Internal
Modems, Reset, Setup, SNMP Information, Confirm Auto Reset
commands. Commands that are unavailable appear in gray
Status
text.
You can use the
to switch from Setup to Customize mode. Customize mode allows
you to set individual Annex parameters and provides access to all
main menu commands. For details, see Part 3 of this book,
Customize Mode.
A series of Setup mode windows allows you to change Annex settings.
Each window groups related settings and provides access to fields based
on your previous selections. You can select:
• The window to change the most commonly used Annex
General
settings. If you click
view and change additional Annex settings.
• The
Async Ports
, you can change port and modem configurations.
Edit Port
• The
WAN Modules
settings you want to view or change. If you click
can set the WAN Module parameters.
• The
SNMP Settings
values for SNMP traps on a Model 5399 Remote Access
Concentrator Module WAN Interface.
• The
Call Defaults
parameters for ISDN Primary Rate Annexes. If you click
, you can change port and modem configurations.
Edit Port

Setup Mode Basics

Open Annex List, Save Annex
heading in the menu bar of the main window
Mode
, a second window allows you to
More
window to select one or more ports. If you click
window to select the WAN Module whose
window to enable, disable, and set threshold
window to set the most commonly used
Annex Manager User Guide
Chapter 5
, and all
, you
Edit WAN
5-1