Chapter 13
Setting Security Values
Understanding the Security Window
Annex Manager User Guide
13-2
The
window divides settings into
Security
and
categories.
VCLI
•
The
box controls security for incoming ports and
Incoming
allows you to select a PPP security setting.
The
and
On
Off
set security for the Annexes you selected in the main
WAN Calls
window. If you select
security server, including security for AppleTalk, CLI, IPX, and
SLIP/PPP connections for the ports or calls you selected.
Modem Ports
Primary Rate Annexes.
Annexes with asynchronous ports.
•
The
PPP Security Protocol
Annex requires before it starts the network control protocol.
You can select:
–
.
None
–
to use password authentication protocol.
Pap
–
to use challenge-handshake protocol.
Chap
–
Chap/Pap
request password authentication if the peer rejects
•
Request the challenge-handshake protocol.
•
Request password authentication protocol if the peer
rejects
Incoming
buttons for
Modem Ports, Non-modem Ports
, Annex Manager activates the ACP
On
and
Non-modem Ports
WAN Calls
box defines the security check that the
to request the challenge handshake protocol or to
.
Chap
Part 2
Setup Mode
,
,
Outgoing
Host Access
, and
do not apply for ISDN
does not apply for
Chap
,