Figure 3-22. Remote Address Tab Window; Figure 3-23. Quick2Config Reset Confirmation Dialog Box - Bay Networks NA Install Manual

Chapter 3 Configuration Examples
Installing Remote Annex Network Software for Windows
3-28

Figure 3-22. Remote Address Tab Window

3. Enter a starting address in the First Remote Address field.
Quick2Config computes the end of the range and displays the
address in the Last Remote Address field.
4. Click on Apply.
Quick2Config Annex opens a dialog box for you to confirm that the
unit is to be set to the new configuration
Figure 3-23. Quick2Config Reset Confirmation Dialog Box
5. Click on OK.
(Figure 3-23).