Type Async; Type Annex Values 0 To; Default - Bay Networks Manager User Manual

Chapter 22 Annex Parameters
inactivity_timer
inet_addr
input_buffer_size
Annex Manager User Guide
22-50
specifies the number of minutes that a port can remain inactive. If the timer
expires, the Annex terminates all sessions and resets the port. You can use
and
input_is_activity output_is_activity
output from the port. If you set these parameters to
independent of activity. To reset a port regardless of any activity, enter a number
of minutes here, set
input_is_activity
to .
port_type dialin
Type Async
Values 0 to 255 minutes

Default

0 (timer disabled)
Lists Async Port, Idle Timer, Modem, Modem Internal
defines the Annex IP address. This 32-bit address contains four 8-bit fields
separated by periods. Each field contains a number ranging from 0 to 255 or a
hexadecimal number. The IP address always displays in decimal notation.
Type Annex
Values For each field: 0 to 255 or hexadecimal
Default n/a
Lists
Annex Only, Basic Annex
provides the number of 256-byte blocks allocated to receive input characters for
a port.
Type
Async
Values
1 to 255
Default
1
Lists
Async Port, Flow Control
Part 5 Reference Information
to define activity as input to the port or
disabled
and to
output_is_activity
, the timer runs
and set
disabled