Figure 4-3. Automatic Discovery Process Window - Bay Networks Manager User Manual

Part 1 Annex Manager Basics
Understanding the Automatic Annex List
When you start Annex Manager, the software finds all available Annexes
on your local network and places them in the main window Annex List
box with their hardware types.
To disable this process, us the
Manager (e.g., type
Annex Manager displays a new window over the main window to inform
you that the automatic discovery process is taking place

Figure 4-3. Automatic Discovery Process Window

As Figure 4-3 shows, this message window indicates that you did not
enter a specific
Internet Address
default broadcast address for your local network, and a default timeout
value.
You can use the
mask),
(Discover Timeout), and -
-dt
arguments when you load Annex Manager to override default
settings. For example, you can type
255.255.255.0 -dt 5
internet address and 255.255.255.0 subnet mask with a response
time of 5 seconds. You cannot use
Manager does not require that you enter a new timeout value.
Chapter 4
argument when you load Annex
-nod
).
gui_am -nod
or . In addition, it includes the
Subnet Mask
(Discover Network),
-dn
nod
gui_am -dn 132.245.88.0 -ds
to discover Annexes for the 132.245.88.0
and
-dn
Annex Manager User Guide
Using the Main Window
(Figure 4-3).
(Discover Subnet
-ds
(No Discovery) command
separately. Annex
-ds
4-5