Selecting Security Window Settings; Figure 13-2. Reset Parameters Window - Bay Networks Manager User Manual

Chapter 13 Setting Security Values

Selecting Security Window Settings

Selecting Settings
Annex Manager User Guide
13-4
To select new security settings:
1. Display the
Security
2. Select new settings.
If the window first appears with the
Security
Non-modem Ports On
parameter was set to
Manager deactivates security but does not change the
enable_security
3. Click
Apply
The
Reset Parameters
the
Confirm Auto Reset
settings you changed require Annex Manager to reset Annexes. If
you did not select
Annexes without notifying you.

Figure 13-2. Reset Parameters Window

window.
and buttons selected, the
Off
. If you select either
enabled
setting.
.
window (Figure 13-2) appears if you selected
option from the pull-down menu and if the
, Annex Manager resets
Confirm Auto Reset
Part 2 Setup Mode
and/or
Modem Ports
enable_security
button, Annex
Off