Table of Contents
Advertisement
Voice Services Software Installation Guide
Edit the following variables:
3.
•
•
Repeat steps
4.
Once you have all the needed customers in the code, it is time to enter the
customers into the database. See
information.
Entering the Customers in the Database
Right above the
1.
DB
Go back down to the code you entered, and verify that it is correct. Make
2.
sure that the code is punctuated exactly as shown on the previous page.
When you are ready to enter the customers into the database, go to
3.
in the toolbar and select
To ensure the entry was successful, click on the
4.
There should be several messages like
represents the number of customers you entered. If there are, then the entry
was successful.
Next, you need to enter the correct customer name and address. This can be done
using the Control Center to administer the Gateway Routing Manager (CS)
software.
Entering the Correct Customer Name and Address
From the Control Center, go to
1.
the top of the screen.
Locate the customer(s) you just added.
2.
4-16
In the first line, locate the first, second, third, and fifth variables. In the
sample code, these are
respectively. For the second customer, change the
to
(one). For the third customer, change the
1
(two). Continue this numbering scheme as you add customers.
In the third line, edit the
variables as described in
Customer.
2
and
3
as many times as needed.
tab in SQL Query, there is a drop down box with
Query
next to it. Find the database called
,
,
, and
0
'Test0'
'0'
Customer Account Number
Customizing the Sample Code for One
Entering the Customers in the Database
ns_db
Execute
.
(x Row(s) Effected)
and click on the
CS
'0@netspeak.com'
(zero) in each variable
0
(zero) in each variable to
0
and
Customer PIN
for more
in the list, and select it.
Results
tab.
, where
CS Activated
303143-A Rev. 00
2
Query
x
tab at
Advertisement
Table of Contents
