Editing Script Files - Bay Networks Manager User Manual

Part 3 Customize Mode

Editing Script Files

You can use an ascii editor to change saved script files. Annex Manager
verifies each file according to its first four lines. When you edit these
files, you must use Annex Manager conventions. Script files always begin
with:
#
# DB_VERSION: V1.0
# FORMAT: Parameter Name | Port Type | Port Number | Value
#
For example, you might enter
accept:
• in the
0 Port/Channel Number
parameters.
• A port or channel number or an asterisk (to specify a wildcard
port) in the
Port/Channel Number
• , , ,
Asy ptr eth 2
parameters) in the
• Comment lines as long as each line begins with
Manager processing ignores these lines.
For detailed information about the values of each parameter, see
Chapter 22, Annex Parameters.
Chapter 17 Viewing, Creating, and Executing Scripts
lock_enable| none | 0 | enabled
field when you select non-port
field.
(for DS1 ports) or
none
field.
Port/Channel Type
Annex Manager User Guide
. Script files
(for
All Annex Only
. Annex
#
17-15