Chapter 1
Installing Annex Manager
Running Annex Manager
Annex Manager User Guide
1-12
You can run Annex Manager after you install the application and set
environment variables:
Type
at the shell prompt. You can use the following command
gui_am
line options with
gui_am
•
-
dn <network_address>
•
-
ds <subnet_mask>
•
-
to discover the Annex timeout
dt <timeout>
•
-
anx <annex_name>
•
-w <community_string>
•
-
for no discovery
nod
If you did not set a path, type
or type the full path.
is a script file that sets environment variables and runs
gui_am
the Annex Manager
invoke
gui_am_exe
A window appears that informs you about the initialization process.
Figure 1-1. Initialization Window
When the initialization process ends, this window disappears and you can
use Annex Manager.
Part 1
:
to discover the network address
to discover the Annex subnet mask
to display the Annex name
to display the community string
cd <install directory>/bin
executable.You should not
gui_am_exe
from the command line.
Annex Manager Basics
and then type
gui_am