Using Push Buttons - Bay Networks Manager User Manual

Part 2 Setup Mode
• The box activates security for modem and non-modem
Outgoing
ports:
The and
On Off
control host-based security for access through the port server. If
you select the
the ports.
• The
Host Access
The and
On Off
security that authorizes connections from CLI to a network
host. If you select the
connection to a host from the Annex based on the
file.
• The box provides
VCLI
The and
On Off
validation on virtual CLI connections to an Annex. If you select
the button, the Annex uses the same user name and
On
password validation for virtual CLI connections as it does for
CLI security.
I f the Annexes you chose currently use this security system, the
button for
Modem Ports
is selected when this window first appears. In this case, the
Security
enable_security
settings in this window to
but does not change the

Using Push Buttons

The window uses the
Security
push buttons. For detailed information about these buttons, refer to
Chapter 5, Setup Mode Basics.
Chapter 13
buttons for
Modem Ports
buttons, authorized users only have access to
On
box provides
Restrict
buttons for the
Restrict
button, the security server authorizes a
On
buttons:
Security
buttons for the
Security
,
Non-modem Ports
parameter is set to
enabled
, Annex Manager deactivates security
Off
enable_security
,
Apply Restore
Annex Manager User Guide
Setting Security Values
and
Non-modem Ports
buttons:
field activate host-based
acp_restrict
field control user
, , and
WAN Calls, Restrict
. If you change all security
parameter setting.
, , and
Help Close
On
13-3