Understanding The Ip Window - Bay Networks Manager User Manual

Chapter 14 Using the AppleTalk, IP, IPX, and LAT Windows
Annex Manager User Guide
14-4

Understanding the IP Window

This window allows you to view and change IP addresses and interface
routing information for the Annexes you selected.
•
Internet Address
address contains four 8-bit fields separated by periods. Each
field contains a number ranging from 0 to 255 or a hexadecimal
number. The IP address always displays in decimal notation.
You can use this field only when you select a single Annex in
the main window.
• contains the IP subnet mask. The initial display of
Subnet Mask
the field is based on the network portion of the Annex IP
address. Entering an incorrect
problems.
The box allows you to specify RIP versions.
Interface Routing
•
Accept RIP version
accepts. You can enter:
– to accept version 1 packets only.
1
– to accept version 2 packets only.
2
– to accept version 1 and 2 packets.
1 and 2
•
Send RIP version
over IP interfaces. You can choose:
–
1 to broadcast address
–
2 to multicast address
–
2 to broadcast address
defines the Annex's IP address. This 32-bit
Subnet Mask
controls the RIP versions that an Annex
controls the RIP versions that an Annex sends
.
.
.
Part 2 Setup Mode
can cause routing