Chapter 19
Booting and Resetting Annexes
Displaying the
Window
Annex Manager User Guide
19-2
Displaying the Boot Window
The
command originates in the Configure menu. To display the
Boot
window:
1.
Create an Annex list in the main window.
For more information about Annex lists, see Chapter 4, Using the
Main Window.
2.
Select one or more Annexes from the list.
3.
Hold the mouse button on the Configure menu, choose
release the mouse button.
The
window appears as shown in
Boot
This figure shows the
Figure 19-1. Boot Window
Part 4
window for a single Annex :
Boot
Control and Status Commands
Boot
Figure
19-1.
and