Understanding The Set Window Format - Bay Networks Manager User Manual

Part 3 Customize Mode
Entering Port/Channel
Types and Port/
Channel Numbers

Understanding the Set Window Format

The window consists of a work area, a message box, a port/channel
Set
type option button and port/channel number field, and push buttons. Its
format allows you to see and change current parameter values and to
review your work.
Entering Port and Channel Information
The parameters you choose in the main window determine whether you
need to enter port, interface, or channel information for the
If you select parameters that require this information, you can select a
port or channel type and enter port or channel numbers in fields located
below the .
Work Area
To select a port/channel type and enter port/channel numbers:
1. Hold the mouse on the option button that displays
The menu displays
DS0 Channel(s)
2. Highlight the port or channel type you want and release the
button.
You must enter a port or channel type that matches your
selection in the main window. For example, if you choose
Options
the
Async Port List
3. For
Async Port(s)
enter one or more port or channel numbers or All in the field
next to the option button.
To enter specific ports or channels, separate numbers with commas
or indicate a range of numbers using dashes. For example, you
might enter ,
1
1 through 3 and port 8. For
automatically. You cannot change this value.
Chapter 16 Viewing and Changing Parameters
,
Async Port(s) Printer Port(s), Enet Port(s),
, and .
WAN Module #
option, you should not select
, ,
Printer Port(s) DS0 Channel(s)
, to specify three ports, or
3 8
Enet Port(s)
Annex Manager User Guide
command.
Set
Async Ports
Parameter
here.
Enet Port(s)
, and
WAN Module #
to specify ports
1-3, 8
ports, displays
1
.
16-9