Broadcasting Messages; Figure 19-4. Reset Command Confirmation Window - Bay Networks Manager User Manual

Part 4 Control and Status Commands

Broadcasting Messages

W
ARNING
Figure 19-4. Reset Command Confirmation Window
You can choose
return to the
Reset
Once you reset an Annex, a warning window appears. This window
lists the Annexes that were reset and, if necessary, lists Annexes
where was unsuccessful.
Reset
The command lets you send messages to all ports on one or
Broadcast
more Annexes. You can use this command to communicate quickly with
all terminals connected to the Annexes you select. This section includes:
• Displaying the Broadcast Window
• Understanding the Broadcast Window Format
• Sending a Broadcast Message
Chapter 19 Booting and Resetting Annexes
to reset an Annex or
OK
window.
Annex Manager User Guide
to
Cancel
19-15