Table of Contents
Advertisement
Before You Use Show
and Set Commands
Viewing and Changing Parameters
T
he
and
commands allow you to view and change Annex
Show
Set
parameters. These commands appear in the main window push buttons
Configure menu.
Show
comprise parameter groups and lists.
lets you view and change parameter values.
This chapter describes
•
Viewing Parameter Values
•
Changing Parameter Values
•
Identifying Errors
The
and
commands are based on information you enter in the
Show
Set
main window. Before you use
1.
Create an Annex list and select one or more Annexes from the
list.
and
display information only for connected Annexes that
Show
Set
you select.
2.
Choose a
Parameter Option
The appropriate group or list appears in the box.
3.
Select a single parameter group or one or more individual
parameters.
Once you enter required information in the main window, you can use
the
and
commands.
Show
Set
, Using the Main Window
refer to Chapter 4
and
display values for the parameters that
Set
lets you view information;
Show
and
in the following sections:
Show
Set
or
, you need to:
Show
Set
.
For detailed information about the main window,
.
Annex Manager User Guide
Chapter 16
Set
16-1
Advertisement
Chapters
Table of Contents
