Sending A Broadcast Message - Bay Networks Manager User Manual

Nortel annex manager software: user guide

Hide thumbs Also See for Manager:

Table of Contents

Booting and Resetting Annexes

Using the Broadcast

Annex Manager User Guide

Using Push Buttons

uses the following push buttons:

activates the

you selected.

displays a window that explains the

Sending a Broadcast Message

terminals connected to an Annex. To send a message:

Create an Annex list and select one or more Annexes.

For more information about creating lists, refer to Chapter 4, Using

the Main Window.

Broadcast Destination

You can select

to Choosing a Broadcast Destination earlier in this chapter.

Enter message text in the

Your message can use up to 128 characters in any number of lines.

Annex Manager sends your message to all users connected to the

Annexes you selected.

command for the Annexes

window from your display.

when you need to communicate quickly with all

from the Conﬁgure menu.

window displays (see

Figure 19-5 on page

. For detailed information, refer

Broadcast Message

Control and Status Commands

Table of Contents