Provisioning A Line-Based Voice-Mail Server - Nortel 5100 User Manual

Parameter Type
Domains String (60)
Username String (60)
Password String (20)
Port Integer
Address String (100)
SMDI Version Float
Voicemail Host Name of the
voice mail
host (up to
30
characters)
3

Provisioning a line-based voice-mail server

Provisioning a Line-based voice-mail server allows you to configure the
application so that it can communicate with a voice-mail server using a Lines
Gateway. The Session Manager is given information about which Lines Gateway
to use and which line numbers to use for sending calls to the gateway when
routing a call to voice mail.
Range
Up to 60
characters
Up to 60
characters
Up to 20
characters
None
Up to 100
characters
None
Up to 30
characters
Click Submit.
The trunk-based voice-mail server you added now appears in the list of
voice-mail servers.
Default Description
None The domains that use this
trunk-based voice-mail server.
Use the Ctrl-click key to select
multiple domains to use the same
voice-mail server.
N/A The Telnet username for logging i
to the SMDI TELNET server.
N/A The Telnet password for logging
on to the SMDI TELNET server.
None The SMDI server communicates
to this port through Telnet.
N/A The Long name of the iTouch
terminal configured on the System
Manager.
None The SMDI version. Two versions
of the SMDI protocol exist:
Version 1 and Version 2. (Version
2 is the latest draft and is
supported by most voice-mail
servers.)
None The name of the voice-mail server
host.
(Select one of the
hosts from the
drop-down list.
Provisioning Client User Guide
139