Nortel 5100 User Manual page 148

148
Parameter
Idle Display
Time Zone
Locale
Restriction
Q0S 802.1Q Priority Integer
3
4
5
NN42020-105 MCS 5100 Release 4.0 Standard 01.06 November 2007
Type Range
String (30) Up to 30
characters
String (20) Any valid
entry in
table
TIMEZONE
INFO
String (20) N/A
Full Access N/A
Restricted
0 (0x00) to
7 (0x07)
Click Save.
A window appears saying that the device is successfully added.
The device is now provisioned with the parameters that were entered and is
ready for log on. To remotely place a user on an IP Phone, click the Assign
user to device link at the top of the screen (the equivalent to a user logging
on).
The Device Users window appears.
Enter the user name in the text field and click Add. (If you do not add a
domain name for the user, the domain or subdomain of the device is used.)
Tip: You can add up to four different users for each IP Phone 2002, or
up to six different users for each IP Phone 2004 or IP Phone 2007.
To move users up or down in the selected window, select the user and click Up
or Down. To remove a name, click Remove or Remove All.
Default Description
N/A Idle telephone display heading.
N/A The time zone for this user.
N/A The locale of this user.
Full Full access applies no device restrictions on
access the user. Restricted access disables device
options.
6 (0x06) This parameter is only active if QoS 802.1Q
priority is enabled. If active, this parameter
sets the QoS 802.1Q priority value for the
device. This priority value is marked on all
media packets generated by the device. If
QoS 802.1Q priority is disabled, no priority
value is assigned to the device and there is
no priority value applied to media packets
generated by the device.