Adding System Locations - Nortel 5100 User Manual

7
8

Adding system locations

The MCS system automatically creates a default location named Other when a
domain is created. Every domain has this default location of Other and each
instance of Other is unique. However, an administrator can use the Provisioning
Client to create one or more locations for their domains.
To add a location
1
2
Field
Location (brief description)
Location (address or complete
description)
3
Select the domain from the Assigned Domains field and click Remove to
remove the domain.
Click Cancel to abort the action.
Select Service nodes > List System Locations.
The Location Management page appears.
Click the Add Location form to create a new location.
The Add Location page appears.
Complete the location fields as described in the following table.
Click Add Location to add the location.
A message appears saying that the location is successfully added.
Description
The location name, a brief description of the
location being added. This field cannot be
null.
Maximum length = 30 characters.
The Master Street Address Guide (MSAG)
address for the location being created. This
field is required if the location is defined as an
ERL. If the location is not defined as an ERL,
this value can be left blank or a longer
description or address can be entered.
Maximum length = 150 characters.
Provisioning Client User Guide
157