Provisioning A Sip-Based Voice-Mail Server; Adding A Sip-Based Voice-Mail Server - Nortel 5100 User Manual

136

Provisioning a SIP-based voice-mail server

You can provision a SIP-based voice-mail server, which permits you to configure
the Session Manager so that the Session Manager communicates with a
voice-mail server using the SIP protocol.
The Session Manager is given information about what to query to find the location
of the voice-mail server. The Session Manager uses this information to send SIP
calls to the voice-mail server when calls are routed to voice mail.

Adding a SIP-based voice-mail server

To add a SIP-based voice-mail server
1
2
Parameter
Name
Type
Client contact
NN42020-105 MCS 5100 Release 4.0 Standard 01.06 November 2007
Select Voice Mail > Add SIP VMS.
The Add a new SIP Voicemail Server window appears.
Enter information and values about the SIP-based voice-mail server in the
parameter fields as described in the following table.
Type Range
String (200) Up to 200
characters
String (100) Up to 100
characters
String (400) Up to 400
characters
Default Description
None The name that identifies the
SIP-based voice-mail server.
SIP_VMS A specification that the voice mail
gateway is SIP.
Voice Mail The field used to route voice mail.
In most cases, you use the default
(voice mail). If you require a
different client contact, contact
your technical support
representative.