Listing A Node; Assigning A Domain To A Node - Nortel 5100 User Manual

3
Click Add.

Listing a node

You can view all the nodes provisioned on the system.
To list a node, select Service nodes > List Node. The List Nodes page appears,
showing the node or all the nodes that were provisioned from the Add Nodes
page.

Assigning a domain to a node

When a service node is added, you can assign a domain to a node, such as a
gateway or a Media Application Server.
To assign a domain to a node
1
Select Service nodes > List Node.
2
Select the Domains link of the node name.
The Assign Domains page appears.
3 Select the domain you wish to associate with the node from the Available
Domains drop-down list.
4
Click Add.
The Assigned Domains field shows the domain you added.
5 Select the domain from the Assigned Domains field and click Remove to
remove the domain.
6 Click Save to save your changes or Cancel to abort the action.
Tip: After a domain is assigned to a node, the domain can use the node
to create gateway routes, Emergency Response Locations (ERLs), or
assign to Routable Services.
Provisioning Client User Guide
153