Chery A11 2003 Repair Manual page 721

Chery
16.1 Oil Carried HCU
If spare part is an oile carried HCU, after replacing, fill and bleed HCU using conventional brake system methods.
16.2 Dry HECU
If spare HECU is a dry one, after replacing, HECU second circuit must be bleeded after filling and bleeding as per
conventional brake system. Operating procedures are as following using scan tool:
SQR7160 series sedan ABS system－fault diagnostic and repairing
16. Filling brake fluid and bleeding
Filling and bleeding as per conventional brake system
procedures until no bubbles in transparent pipes.
Connect scan tool to diagnostic connector
Enter 03 at ADDRESS, press Q key.
Enter 04 at FUNCTION SELECT, press Q key.
Enter 001 at GROUP NUMBER, press Q key.
To next page
30