Chery A11 2003 Repair Manual page 191

CAC Gasoline Engine Maintenance And Servicing Manual
4. The removal and installation of oil pump with oil seal assembly
removal：
——Loosen six M6×30 hexagonal flange surface bolts. Remove the
bolts (as the figure indicates )
——Remove oil pump with oil seal assembly
Fig. 79
——Pry out the front oil seal of crankshaft by screwdriver or chisel.
Note: Don't damage the front oil seal bore.
Fig. 80
——Remove seven M6 countersunk head screws (as the arrow in
figure indicates )
——Remove oil pump cover
Fig. 81
——Take out the inner and outer rotor
Fig. 82
47
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn